Dewalt Portable Forced Air Electric Heater, DXH1000TS

Dewalt portable forced air electic construction heater, 34,121/23,884 Btu., F340645
Manufacturer part number: DXH1000TS
$499.00

DeWALT Portable Forced Air Electric Construction Heater: DXH1000TS

 The thermostatically controlled DXH1000TS Electric heater operates at 10,000 watts on a 240v single phase circuit. As a convenience, this heater can also be used at 7000 watts depending on which size circuit is available on your particular jobsite. Constructed with dual coil supports oversized ergonomic handle and very durable jobsite construction.

 

  • Two stage Operation - Connects to either a 50A or 30A breaker
  • Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temerature.
  • Designed and certified as an unattended source of jobsite heat.
  • Recessed controls designed to reduce the risk of damage on the jobsite.
  • Burner coils are supported at both the top and bottom to reduce transport noise and provide extra support for increased coil life.
  • Output: 34,121 / 23,884 Btu/hr.
  • Amps: 28 / 42 A
  • Minimum Breaker Required: 2-Pole 50A @ 10KW / 2-Pole 30A @ 7KW
  • Single Phase
  • Watts: 10,000 W
  • Output (CFM):  350 CFM
  • OUtput: 10KW / 7KW
  • System 240V
  • Weight:   35 lbs.

Currently only shipping this item within the 48 contiguous United States.

DeWALT Portable Forced Air Electric Construction Heater: DXH1000TS

 The thermostatically controlled DXH1000TS Electric heater operates at 10,000 watts on a 240v single phase circuit. As a convenience, this heater can also be used at 7000 watts depending on which size circuit is available on your particular jobsite. Constructed with dual coil supports oversized ergonomic handle and very durable jobsite construction.

 

  • Two stage Operation - Connects to either a 50A or 30A breaker
  • Equipped with a 25°F-95°F thermostat. The heating element cycles on and off to maintain the set temerature.
  • Designed and certified as an unattended source of jobsite heat.
  • Recessed controls designed to reduce the risk of damage on the jobsite.
  • Burner coils are supported at both the top and bottom to reduce transport noise and provide extra support for increased coil life.
  • Output: 34,121 / 23,884 Btu/hr.
  • Amps: 28 / 42 A
  • Minimum Breaker Required: 2-Pole 50A @ 10KW / 2-Pole 30A @ 7KW
  • Single Phase
  • Watts: 10,000 W
  • Output (CFM):  350 CFM
  • OUtput: 10KW / 7KW
  • System 240V
  • Weight:   35 lbs.

Currently only shipping this item within the 48 contiguous United States.

Product tags